3Com PDAs Smartphones V User Manual

Handbook  
for the  
Palm VModem  
 
Contents  
Chaper 1: Introduction  
Chapter 2: Setting Up And Using Your Palm V™ Modem  
Installing the batteries ..........................................................................5  
Attaching Palm V Modem and cables................................................6  
Configuration for remote HotSync and  
Network HotSync..................................................................................7  
Using your Palm V Modem ...............................................................10  
Detaching your Palm V Modem .......................................................10  
Appendix: Warranty and Regulatory Information  
Contents  
Page iii  
 
Page iv  
Handbook for the Palm V™ Modem  
 
Chapter 1  
Introduction  
Palm V™ Modem enables you to send and receive data at your  
convenience. You dont have to connect your Palm V™ connected  
organizer directly to your computer or laptop to update your data.  
HotSync  
button  
organizer  
ACadapter  
jack  
modem  
Wireless phone  
connector  
Phone  
connector  
What can I do with my Palm V Modem?  
With your modem and organizer you can:  
Synchronize your organizer and Palm™ Desktop organizer  
software from remote locations with one touch.  
Take full advantage of Palm V organizer applications, such as  
Mail, using Network HotSync and TCP/ IP.  
Also, there are many software applications available from third-party  
vendors that enable you to use your organizer and modem to:  
Send and receive e-mail.  
Send faxes.  
Browse the Internet.  
Perform remote synchronizations with your Personal Information  
Manager (PIM), such as Lotus Organizer, Symantic ACT, and  
Microsoft Outlook.  
Chapter 1  
Page 1  
 
   
Contact the third-party vendors below for more information about the  
software applications you can use with your organizer and modem.  
Use  
Application  
Description  
Vendor  
E-mail  
Network  
HotSync  
Supports remote access 3Com  
to your e-mail using  
either your companys  
existing LAN or dial-in  
(RAS) server  
www.palm.com  
HandMail  
Supports SMTP and  
POP3 e-mail protocols  
SmartCode Software, Inc.  
www.smartcodesoft.com  
One Touch  
Palmeta Mail  
Supports SMTP and  
POP3 e-mail protocols  
JP Systems  
www.jpsystems.com  
Supports Netscape  
Mail or any MAPI  
e-mail system  
Palmeta Software  
www.palmeta.com  
MultiMail Pro  
HandFax  
Supports SMTP, POP3, Actual Software  
and IMAP4 protocols  
www.actualsoft.com  
Fax  
Supports standard  
Class 2/ 2.0 fax  
machines  
SmartCode Software, Inc.  
www.smartcodesoft.com  
Internet  
browsing  
HandWeb  
Browses, surfs, and  
navigates the Internet  
SmartCode Software, Inc.  
www.smartcodesoft.com  
Remote  
synchron-  
ization  
Desktop To Go  
Supports Microsoft  
Outlook  
DataViz  
www.dataviz.com  
PilotMirror  
Intellisync  
Supports Microsoft  
Outlook  
Chapura, Inc.  
www.chapura.com  
Supports Microsoft  
Outlook, Symantec  
ACT, GoldMine, Lotus  
Notes, Lotus  
Tele-Support Software  
www.pumatech.com  
Organizer, and  
Meeting Maker  
Remote  
synchron-  
ization  
EasySync  
Supports Lotus  
Organizer  
Lotus  
www.lotus.com/ calendar  
Now  
Synchronize  
Supports Now Up to  
Date  
Now Software  
www.nowsoft.com  
Page 2  
Introduction  
 
Optional equipment and software  
Palm Computing also offers the following modem accessories:  
AC adapter (110V or 100-240V).  
GSM Upgrade Kits (includes wireless phone cable and software  
for either Nokia 6100 or 8100 series phones, or Ericsson  
600/ 700/ 800 series phones).  
Palm V™ Travel Kit (includes HotSync cable, recharger, and plug  
adapters).  
Chapter 1  
Page 3  
 
Page 4  
Introduction  
 
Chapter 2  
Setting Up And Using Your Palm V™  
Modem  
Before you use your Palm V™ Modem, you must:  
Install the batteries.  
Attach your modem to your organizer.  
Connect an analog phone or wireless phone cable to your modem.  
Configure your computer.  
Configure your organizer.  
Installing the batteries  
To use your modem, you must first  
install two AAA alkaline batteries. The  
batteries fit in the compartment behind  
the battery door on the back of the  
modem.  
Note: A diagram in the interior of the  
battery compartment shows the  
orientation of the positive (+)  
and negative (-) ends of the  
batteries. When correctly  
installed, the clips in the battery  
compartment secure the  
batteries in place.  
Replacing batteries  
Under normal conditions, the AAA batteries provide up to two and a  
half hours of continuous use. When your modem has approximately  
20 percent of battery life remaining, it will sound three short beeps,  
which will repeat every 5 minutes until the batteries are drained.  
Replace the batteries as soon as possible.  
Chapter 2  
Page 5  
 
   
Attaching Palm V Modem and cables  
Your modem has a 10-pin connector that slides into the grooves of  
your organizer connector. Make sure your organizer snaps into place  
onto the modem latch in the center of the modem.  
You can use either the standard RJ11 cable to connect to an analog  
phone line, or a wireless phone cable (available separately) to connect  
to your cell phone.  
latch  
Slide into connector  
Snap onto modem latch  
Insert phone cable  
Note: It is important to use a standard analog phone line, such as  
those used in homes. If you use your modem in an office or  
hotel, make sure it is connected to a phone line with a data  
port, a fax line, or a modem line. If you use the wrong type of  
phone line, your modem emits five beeps. Disconnect the  
cable and try a different line.  
Page 6  
Setting Up And Using Your Palm V™ Modem  
 
 
Configuration for remote HotSync and  
Network HotSync  
You can use your Palm V Modem and your computer modem to  
®
perform remote HotSync operations, or synchronize your e-mail on  
your computer, using Palm V organizer applications. You can also use  
your Palm V modem and Network HotSync on your organizer to  
access your e-mail and other data using your companys existing LAN  
or dial-in (RAS) server. Contact your System Administrator to set up  
Network HotSync, or for more information on using Network  
Setting your computer preferences  
Before you can use your modem, you must prepare your computer to  
accept the incoming call, and make sure Palm™ Desktop organizer  
software settings are correct.  
To set up your PC for a remote HotSync or Network HotSync operation:  
1. Click the HotSync Manager icon  
(bottom-right corner of the taskbar).  
™ from the System Tray  
2. In the HotSync Manager menu in the System Tray, make sure  
Modem is checked.  
Or, if you want to synchronize using Network HotSync, make sure  
Network is checked.  
3. From the HotSync Manager menu in the System Tray, choose  
Setup.  
4. Click the Modem tab and adjust the connection setting options as  
needed.  
5. Click OK.  
Important: Remember to leave your computer running so you can  
perform remote operations.  
To set up your Macintosh for a remote HotSync operation:  
1. Click the HotSync Manager icon  
from the Instant Palm  
Desktop menu (upper-right corner of your screen).  
2. From the HotSync menu, select HotSync Setup, and on the Serial  
Port Settings tab make sure Modem is checked.  
3. Adjust the Modem Setup options as needed.  
4. From the File menu, choose Quit.  
Chapter 2  
Page 7  
 
 
Important: Remember to leave your computer running so you can  
perform remote operations.  
Setting your organizer preferences  
Since your Palm V Modem uses the Modem Sync software that is  
resident in your organizer to establish a phone connection with  
another modem, you must also configure your organizer phone  
settings.  
To set your organizer preferences for modem operations:  
1. Tap the Applications icon  
2. Tap the HotSync icon  
.
.
3. Tap the Enter Phone # field.  
4. Enter the telephone number to access the modem connected to  
your computer.  
5. If needed, enter a dial prefix (such as “9”) to access an outside line,  
and then tap the Dial Prefix check box.  
Tip:  
You can enter a comma in the field to introduce a “pause”  
in the dialing sequence.  
6. If the phone line youre using for the organizer has Call Waiting,  
select the Disable call waiting check box to avoid an interruption  
during the modem HotSync operation.  
7. If you want to use a calling card to place the call, select the check  
box and enter the calling card number.  
8. Tap OK.  
9. Tap the Menu icon  
.
10. Tap Options, and then tap Modem Setup.  
Page 8  
Setting Up And Using Your Palm V™ Modem  
 
11. Tap Country, then tap the country you are in.  
12. Accept the default settings, or adjust the following options as  
needed.  
Modem  
Choose between the Palm V default settings  
and a custom setting. The custom setting is for  
advanced modem users and is created  
automatically when AT commands are  
entered in the string field.  
Speed  
Determines the modem speed for  
downloading data. Choose 57,600 bps to  
obtain the fastest performance for your  
modem.  
Speaker  
Flow Ctl  
Controls the modem speaker volume.  
Regulates the data sent to your modem. When  
your modem receives data, it holds the data in  
its buffer until the data is ready to be sent. If  
your modem receives more data than its buffer  
can hold, the modem will use flow control to  
temporarily stop data transmission.  
Country  
String  
Selects the country you are in when you make  
the connection.  
For advanced users only. The field is used for  
standard AT commands that enable the  
modem to perform special functions.  
TouchTone/  
Rotary  
Select the Rotary setting only if you are certain  
that your telephone service does not support  
TouchTone dialing.  
Chapter 2  
Page 9  
 
Additional settings for Network Hotsync  
If you want to use Network Hotsync to access data, you will also need  
to adjust your organizer preferences to use a network.  
To prepare your organizer for a Network HotSync operation:  
1. Tap the Applications icon  
2. Tap the HotSync icon  
.
.
3. Tap the Menu icon  
.
4. Tap Options, then tap Modem Sync Prefs.  
5. Tap Network.  
6. Tap OK.  
Using your Palm V Modem  
Now when you leave the office, you  
can use your Palm V Modem to stay  
connected. Use the software installed  
on your organizer to synchronize  
data between your organizer and  
your computer. Press the HotSync  
button on the front of your modem to  
initiate remote HotSync operations.  
Detaching your Palm V Modem  
When you have completed your modem operations, slide the button  
on the back of your modem, then pull to the left off the organizer.  
Slide modem latch button  
Pull organizer from modem  
Page 10  
Setting Up And Using Your Palm V™ Modem  
 
   
Appendix  
Warranty and Regulatory  
Information  
Limited warranty  
HARDWARE: Palm Computing, Inc., a subsidiary of 3Com Corporation (collectively  
"3Com"), warrants to the original end user ("Customer") that this product will be free  
from defects in workmanship and materials, under normal use, for one year from the  
date of original purchase from 3Com or its authorized reseller. 3Coms sole obligation  
under this express warranty shall be, at 3Coms option and expense, to replace the prod-  
uct or part with a comparable product or part, repair the product or part, or if neither  
repair nor replacement is reasonably available, 3Com may, in its sole discretion, refund  
to Customer the purchase price paid for the product or part. Replacement products or  
parts may be new or reconditioned. 3Com warrants any replaced or repaired product  
or part, and any hardware upgrade to which Customer is entitled under an agreement  
between Customer and 3Com, for a period of ninety (90) days from shipment, or  
through the end of the original warranty, whichever is longer. All products or parts that  
are replaced become the property of 3Com.  
Accessory products, as listed in the applicable 3Com catalogue, are not covered under  
this Limited Warranty except for the modem for the connected organizer, the cradles,  
cables, memory upgrades, and leather items sold under the 3Com® brand. 3Com shall  
not be responsible for Customer's software, firmware, information, or memory data  
contained in, stored on, or integrated with any products returned to 3Com for repair,  
whether under warranty or not.  
SOFTWARE: 3Com warrants to Customer that the Palm™ Desktop organizer soft-  
ware and Palm OS™ software licensed from it will perform in substantial conformance  
to their program specifications, for a period of ninety (90) days from the date of original  
purchase from 3Com or its authorized reseller. 3Com warrants the media containing  
software against failure during the warranty period. No updates are provided. 3Com  
does not provide any warranty for Adobe® Acrobat® Reader or any other third-party  
applications software that is licensed to Customer by the third party. 3Coms sole obli-  
gation with respect to this express warranty shall be (at 3Coms discretion) to refund the  
purchase price paid by Customer for any defective software product, or to replace any  
defective media with software which substantially conforms to applicable 3Com pub-  
lished specifications. 3Com makes no warranty or representation that its software prod-  
ucts will meet Customer's requirements or will work in combination with any hardware  
or applications software products provided by third parties, that the operation of the  
software products will be uninterrupted or error free, or that all defects in the software  
products will be corrected.  
Appendix  
Page 11  
 
   
OBTAINING WARRANTY SERVICE: Customer must contact a Palm Computing,  
Inc. or 3Com Technical Support or Customer Service center within the applicable war-  
ranty period to obtain warranty service authorization. Dated proof of original purchase  
from 3Com or its authorized reseller will be required. 3Com is not responsible for Cus-  
tomer products or parts received without a warranty service authorization. In the Unit-  
ed States, 3Com may ship a replacement product or part prior to receiving the original  
product or part ("advance exchange"). If advance exchange is not available, then the re-  
paired product or part will be shipped as soon as reasonably possible, which will be no  
later than thirty (30) days after 3Com receives the original product or part. Repaired or  
replacement products will be shipped to Customer at 3Coms expense. The repair and  
replacement process for products or parts in locations outside of the United States will  
vary depending on Customer's location.  
Products or parts shipped by Customer to 3Com must be sent prepaid and packaged  
appropriately for safe shipment, and it is recommended that they be insured or sent by  
a method that provides for tracking of the package. When an advance exchange is pro-  
vided and Customer fails to return the original product or part to 3Com within thirty  
(30) days from the date the warranty service authorization is issued, 3Com will charge  
Customer the then-current published catalogue price of such product or part.  
WARRANTIES EXCLUSIVE: IF THIS PRODUCT DOES NOT OPERATE AS WAR-  
RANTED ABOVE, CUSTOMER'S SOLE REMEDY FOR BREACH OF THAT WAR-  
RANTY SHALL BE REPLACEMENT OR REPAIR OF THE PRODUCT OR PART OR  
REFUND OF THE PURCHASE PRICE PAID, AT 3COM'S OPTION. TO THE FULL EX-  
TENT ALLOWED BY LAW, THE FOREGOING WARRANTIES AND REMEDIES ARE  
EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES, TERMS, OR CON-  
DITIONS, EXPRESS OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW,  
STATUTORY OR OTHERWISE, INCLUDING WARRANTIES, TERMS, OR CONDI-  
TIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, SATIS-  
FACTORY QUALITY, CORRESPONDENCE WITH DESCRIPTION, AND NON-  
INFRINGEMENT, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. 3COM NEI-  
THER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT  
ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION,  
MAINTENANCE OR USE OF ITS PRODUCTS.  
3COM SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND EX-  
AMINATION DISCLOSE THAT THE ALLEGED DEFECT OR MALFUNCTION IN  
THE PRODUCT DOES NOT EXIST OR WAS CAUSED BY CUSTOMER'S OR ANY  
THIRD PERSON'S MISUSE, NEGLECT, IMPROPER INSTALLATION OR TESTING,  
UNAUTHORIZED ATTEMPTS TO OPEN, REPAIR, OR MODIFY THE PRODUCT, OR  
ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE, OR BY ACCI-  
DENT, FIRE, LIGHTNING, OTHER HAZARDS, OR ACTS OF GOD. THIS WARRAN-  
TY DOES NOT COVER PHYSICAL DAMAGE TO THE SURFACE OF THE PRODUCT,  
INCLUDING CRACKS OR SCRATCHES ON THE LCD TOUCHSCREEN OR OUT-  
SIDE CASING. THIS WARRANTY DOES NOT APPLY WHEN THE MALFUNCTION  
RESULTS FROM THE USE OF THIS PRODUCT IN CONJUNCTION WITH ACCESSO-  
RIES, OTHER PRODUCTS, OR ANCILLARY OR PERIPHERAL EQUIPMENT AND  
3COM DETERMINES THAT THERE IS NO FAULT WITH THE PRODUCT ITSELF.  
THIS WARRANTY DOES NOT APPLY TO ANY MALFUNCTION OR FAILURE OF  
THE PRODUCT OR PART DUE TO ANY COMMUNICATION SERVICE CUSTOMER  
MAY SUBSCRIBE TO OR USE WITH THE PRODUCT.  
Page 12  
Warranty and Regulatory Information  
 
LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED BY LAW, 3COM  
ALSO EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER  
BASED IN CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL,  
CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND,  
OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMA-  
TION OR DATA, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNEC-  
TION WITH THE SALE, INSTALLATION, MAINTENANCE, USE, PERFORMANCE,  
FAILURE, OR INTERRUPTION OF THIS PRODUCT, EVEN IF 3COM OR ITS AU-  
THORIZED RESELLER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAM-  
AGES, AND LIMITS ITS LIABILITY TO REPLACEMENT, REPAIR, OR REFUND OF  
THE PURCHASE PRICE PAID, AT 3COM'S OPTION. THIS DISCLAIMER OF LIABIL-  
ITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED HERE-  
IN SHALL FAIL OF ITS ESSENTIAL PURPOSE.  
DISCLAIMER: Some countries, states, or provinces do not allow the exclusion or lim-  
itation of implied warranties or the limitation of incidental or consequential damages  
for certain products supplied to consumers, or the limitation of liability for personal in-  
jury, so the above limitations and exclusions may be limited in their application to you.  
When the implied warranties are not allowed to be excluded in their entirety, they will  
be limited to the duration of the applicable written warranty. This warranty gives you  
specific legal rights which may vary depending on local law.  
GOVERNING LAW: This Limited Warranty shall be governed by the laws of the State  
of California, U.S.A. excluding its conflicts of laws principles and excluding the United  
Nations Convention on Contracts for the International Sale of Goods.  
Palm Computing, Inc., a subsidiary of 3Com Corporation  
5400 Bayfront Plaza  
PO Box 58007  
Santa Clara, California 95052-8007  
United States of America  
(408) 326-5000  
September 3, 1998  
Appendix  
Page 13  
 
FCC-68  
This adapter complies with Part 68 of the FCC rules. A label is affixed to the adapter that  
contains, among other things, the FCC registration number, USOC and Ringer Equiva-  
lency Number (REN) for this equipment. If these numbers are requested, provide this  
information to your telephone company.  
The REN is useful to determine the quantity of devices you may connect to your tele-  
phone line and still have those devices ring when your number is called. In most, but  
not all areas, the sum of the RENs of all devices should not exceed five (5.0). To be cer-  
tain of the number of devices you may connect to your line, as determined by the REN,  
you should call your local telephone company to determine the maximum REN for your  
calling area.  
If the adapter causes harm to the telephone network, the telephone company may dis-  
continue your service temporarily. If possible, they will notify you in advance; if ad-  
vance notice is not practical, you will be notified as soon as possible. You will be advised  
of your right to file a complaint with the FCC.  
Your telephone company may make changes in its facilities, equipment, operations, or  
procedures that could affect the proper operation of your equipment. If they do, you  
will be given advance notice to give you an opportunity to maintain uninterrupted ser-  
vice.  
If you experience trouble with this product, contact your Authorized Reseller, or call  
3Com at (847) 676-1441. You may be required to present proof of purchase.  
The telephone company may ask you to disconnect the adapter from the network until  
the problem has been corrected, or until you are sure the adapter is not malfunctioning.  
No customer repairs are possible to the adapter. If you experience trouble with the  
adapter, contact your Authorized Reseller.  
This adapter may not be used on coin service provided by the telephone company. Con-  
nection to party lines is subject to state tariffs. Contact your state public utility commis-  
sion or corporation commission for information.  
When ordering network interface (NI) service from the local Exchange Carrier, specify  
service arrangement USOC RJ11C  
FCC-15  
This equipment has been tested and found to comply with the limits for a Class B digital  
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide rea-  
sonable protection against harmful interference in a residential installation. This equip-  
ment generates, uses, and can radiate radio frequency energy and, if not installed and  
used in accordance with the instructions, may cause harmful interference to radio com-  
munications. However, there is no guarantee that interference will not occur in a partic-  
Page 14  
Warranty and Regulatory Information  
 
ular installation. If this equipment does cause harmful interference to radio or television  
reception, which can be determined by turning the equipment off and on, the user is en-  
couraged to try to correct the interference by one or more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which the  
receiver is connected.  
Consult a 3Com authorized dealer or service representative for help.  
3Com is not responsible for any radio or television interference caused by using other  
than recommended cables and connectors or by unauthorized changes or modifications  
to this equipment. Unauthorized changes or modifications could void the user's author-  
ity to operate the equipment.  
This device complies with Part 15 of the FCC Rules. Operation is subject to the following  
two conditions:  
1. This device may not cause harmful interference, and  
2. This device must accept any interference received, including interference that may  
cause undesired operation.  
Note: This device was tested to comply with FCC-15 Class B requirements.  
Appendix  
Page 15  
 
Manufacturers Declaration of Conformity  
Palm V™ Modem 10401U  
Palm Computing, Inc., a subsidiary of  
3Com Corporation  
5400 Bayfront Plaza  
Tested to Comply  
With FCC Standards  
PO Box 58007  
Santa Clara, CA 95052-8007  
(408) 326-5000  
FOR HOME OR OFFICE  
Declares this product:  
Date:  
December, 1998  
Palm V™ Modem  
10401U  
Name:  
Model Number:  
Equipment Type: Modem  
Complies with Part 15 of the FCC rules. Operation is subject to the following two con-  
ditions:  
1. This device may not cause harmful interference, and  
2. This device must accept any interference received, including interference that may  
cause undesired operation.  
Industry Canada (ICES-003)  
This Class B digital apparatus meets all requirements of the Canadian Interference-  
Causing Equipment Regulations.  
Note:  
This device was tested to comply with FCC-15 Class B requirements in the  
cases of the following configurations:  
(a) Modem  
The user must use the accessories and cables supplied by the manufacturer to get opti-  
mum performance from the product.  
Page 16  
Warranty and Regulatory Information  
 
Industry Canada (CS-03)  
The Canadian Department of Communications label identifies certified equipment.  
This certification means that the equipment meets certain telecommunications network  
protective, operational, and safety requirements. The Department does not guarantee  
the equipment will operate to the user's satisfaction.  
Before installing this equipment, users should ensure that it is permissible to be connect-  
ed to the facilities of the local telecommunications company. The equipment must also  
be installed using an acceptable method of connection. In some cases, the company's in-  
side wiring associated with a single line individual service may be extended by means  
of a certified connector assembly (telephone extension cord). The customer should be  
aware that compliance with the above conditions may not prevent degradation of ser-  
vice in some situations.  
Repairs to certified equipment should be made by an authorized Canadian maintenance  
facility designated by the supplier. Any repairs or alterations made by the user to this  
equipment, or equipment malfunctions, may give the telecommunications company  
cause to request the user to disconnect the equipment.  
Users should ensure for their own protection that the electrical ground connections of  
the power utility, telephone lines, and internal metallic water pipe system, if present,  
are connected together. This precaution may be particularly important in rural areas.  
CAUTION: Users should not attempt to make such connections themselves, but  
should contact the appropriate electric inspection authority, or electrician, as appro-  
priate.  
NOTICE: The LOAD NUMBER (LN) assigned to each terminal device denotes the per-  
centage of the total load to be connected to a telephone loop which is used by the device,  
to prevent overloading. The termination on a loop may consist of any combination of  
devices subject only to the requirement that the sum of the LOAD NUMBERS of all the  
devices does not exceed 100.  
Appendix  
Page 17  
 
CE Mark  
Electromagnetic compatibility  
This product is in conformity with the protection requirements of EC Council Directive  
89/ 336/ EEC on the approximation of the laws of the Member States relating to electro-  
magnetic compatibility. 3Com cannot accept responsibility for any failure to satisfy the  
protection requirements resulting from a non-recommended modification of the prod-  
uct, including the fitting of non-3Com option cards.  
This product has been tested and found to comply with the limits for Class B Informa-  
tion Technology Equipment according to CISPR 22 / European Standard EN 55022. The  
limits for Class B equipment were derived for typical residential environments to pro-  
vide reasonable protection.  
Safety  
This device to which this declaration relates has been tested and is in conformity with  
the following standards.  
EN60950 according to the requirements of Low Voltage Directive 73/ 23/ EEC  
EN55022 Class B and EN50082-1 according to requirements of EMC Directive 89/  
336/ EEC  
Page 18  
Warranty and Regulatory Information  
 

Accton Technology Switch ES4324 User Manual
ADS Technologies Digital Camera AdvanceCAM User Manual
Advanced Wireless Solutions Portable Radio TK 2180 3180 User Manual
Aiphone Amplified Phone PG 10A User Manual
Altinex Switch MT109 100 User Manual
American DJ DJ Equipment Octo Beam User Manual
American Standard Outdoor Shower 6032Y1SW User Manual
Axor Indoor Furnishings 16502XX1 User Manual
BB Electronics Network Hardware EIR608 xSFP User Manual
Behringer Speaker System EX2200 User Manual